Disc Rotor Protector Set, Front and Rear

A bent rotor turns the first day of a trip into a shop visit. These stop that.

Each cover cups the rotor completely and mounts through the hub where your axle normally sits. Thread the stem through, spin the knurled nut down by hand, done in about ten seconds per wheel. Your rotors stay on the bike. Nothing comes off first.

The dish also traps brake grease and oil so it ends up on the cover instead of the inside of your bag.

Designed and printed in Vancouver, BC.

What you get

2 covers, one sized for the front wheel and one for the rear. 2 hand nuts.

Specs

Does not fit

180mm or 203mm rotors. Boost spacing (110mm front, 148mm rear). Quick release hubs.